Towing with a Tow Bar

Towing with tow bar:

    This is the simplest towing procedure of a vehicle. If the vehicle is not wrecked too much and if the wheels can move, then this is the preferable and most cost-efficient procedure. This article is written to provide information for our readers. For further information and to purchase visit the manufacturer https://www.roadmasterinc.com/

How is the towing done using the tow bar?

     A tow bar, usually made of strong metal, is attached to the back of the towing vehicle connecting the front end of the trailer vehicle. The connection is made firm enough to tow the trailer. Once the connection is made and checked, towing is done. 

     Unlike a dolly, this towing procedure involves rotation of all the four wheels of the trailer vehicle. However, this can result in the wear and tear of all the four wheels of the trailer. Moreover, as the trailer vehicle moves when it is in neutral gear, wearing of the engine also takes place if the towing is for a longer distance.      

     In spite of these drawbacks, if the towing is for shorter distance and cost efficiency is a priority, then this is an efficient procedure. By and large, travelers carry this tool along with them. Thus making it a personal towing equipment piece because of its simple and compact structure. 

      As the tow bar is usually made of strong metal which can hold the tension load between the vehicles, this doesn’t cause structural damage to trailing vehicles. 

      Wanna tow your vehicle to a nearby repair shop with minimal equipment and cost?  A tow bar is the best choice. We use Roadmaster’s products, visit their website, listed above in this article. …

Winching Services

                                                      Winching

    Winching is a procedure to haul or lift a vehicle. The name of the instrument gives the name to this procedure as winching. Mounting on a carrier vehicle’s back or to the back of a truck, a winch is used to either tow a vehicle or to pull a vehicle from ditches. 

How does winch work :

     The instrument has a wire rope with a hook-like holding mechanism to its end. The wire rope is wound around the spool of a cylindrical drum. This drum is powered by either an electric motor or hydraulic motor which can pull the wire rope towards itself. This helps the winch to pull vehicles that fell into a river or into ditches or went off-road.

Advantages:

     Along with hauling, the winch can tow a vehicle without using a powered rotor. This gives the superior advantage to the winches over other towing mechanisms. It has a simple and compact structure. Moreover, it is not bulky and remains attached to the vehicle.

     Every winch has its own hauling limit due to which the towing service providers usually have multiple winches with different winching capacity. However, this winching capacity comes down with time due to the wear and tear of these mechanical parts. Hence, servicing the winches once in a while is recommended to maintain the winching capacity.

To maintain your winch, you must make sure you find a practitioner with proper credentials and training to safely handle the integrity of your machinery. In this setting, do not go with the cheapest practitioner, rather, find a trusted source to handle your winch’s maintenance.

For reliable and trusted winching services call our friends at Bethlehem Towing Services. Contact them at : http://www.bethlehemtowing.com/allentown-towing.html